n95 automatic cup mask forming making machine Full automatic mask
making machine
This production line is a fully automatic one-to-two face mask
machine, one body machine drives two ear band machines. After the
main body machine outputs the mask body, the mask body sheet is
conveyed to the turning mechanism by a conveyor belt structure. The
reversing mechanism is used to flip the mask plate onto the belt
connected to the ear band machine, and then the mask sheet is
conveyed to the first mask plate on the front of the ear band
machine through the conveyor belt, and finally the mask sheet is
placed on the ear band by the cylinder pressing In the mask plate
of the machine, the ear band machine is used to complete the
welding of the ear bands of the mask and the edging, thereby
completing the production of an ear band mask product.
| Machine Name | Fully Automatic N95 Face Mask Making Machine |
| Machine size | 9650*2140*1500mm |
| Ear loop length | 130mm+20mm |
| Media width | 300mm |
| Product capability | 35-40pcs/min |
| Power supply | 380v/50Hz, 220V/60Hz |
| Feature | Full automaticlly make n95 fold type face masks |
Product Features of cup mask forming making machine:
1. Adopt the original German machine technique, per the feature of
folded mask, make the nose clip and mask body finish once via
automatic control by ultrasonic technique. Steady quality and high
efficiency.
2. Can make the mask of 2-5 layer raw per required.
3. This is different from other folding mask machine, this install
the nose clip insertion unit: the nose clip can be inserted when
produce the mask which we need, then fold welding and forming, this
improve the automation and save the labor cost for the
manufacturer.
4. PLC control, automatic counting , Easy operate, beautiful finish
product.
5. Servo moto control, dimension control exact.
6. Machine frame made from aluminum , the parts with plating,
outlook rugged beauty and practical.
Function of cup mask forming making machine:
This machine has aluminum alloy rack. The appearance is light and
beautiful. It can finish making the figuration at one time with the
precision moulds. With imported high power ultrasonic it can weld
firmly and waste materials will be outputted automatically. The
computer program control and photoelectric detection make it have a
high reliability and low failure rate. The product can be widely
used in high industrial pollution, factories and mines.
Machine advantages
1. Cutting roller
We use the chrome steel to cover the rubber roller both sides .So
that the rubber is not crack from side after extended periods use.
2. Traction roller
We use the silicone rubber materials instead of the butyronitrile
materials .The silicone rubber materials is good abrasion
resistance and will not crack
3. PLC touch screen
We use DELTA group brand PLC touch screen .
4. Mask nose strip tension controller
We use Mask nose strip tension controller .This device can avoid
the nose strip differ in length .
5. Nose strip straight- feeding device
We use Nose strip straight- feeding device , It can ensure the nose
strip be feeded straightly in the processing, so the finished
mask will be flat and artistic.
7. Non woven raw materials sensors
We use Non woven raw materials sensors,once the raw materials use
up,machine will stop automatically
8. Raw materials tension controller 1
We use the Raw materials tension controller to avoid the materials
plugging .
9. Raw materials tension controller 2
Our machine is equipped with two braking ways . One is belts
pressing and another is screw fixing . You could choose either one
or use both according to your need.
10. Raw materials EPC device
We use raw materials EPC device ,to do materials adjustment.
11. Machine door lock
We just door lock ,with out the key,worker can not start the
machine.
12. Frequency converter
We use DELTA group brand frequency converter .
13. Machine body and materials feeding connect board,We connect
Machine body and material feeding frame with connecting boards,so
that the running of whole machine will be very
stable.
14. Electrostatic eliminator
In our machine we have one electrostatic eliminator . to eliminate
non woven mask surface static.
15. Machine motor
Our geared motor is new type and no need refuel.
16.Fan
We install the fan near the ultrasonic horn ,to Lower the horn
temperatures,to to extend ultrasonic life.
Productivity | 110-120 pcs/ Min |
Voltage | 220V 60HZ |
Machine size | 9800x3000x1800mm |
Mask dimension | 175x95mm |
Power consumption | 10KW |
Machine weight | 1700 kg |
