1.0 - 2.5 mm Roll Forming Machine 18 forming stations for Cable
Tray
Description:
Our cable tray forming machine has many advantages of stablity,
efficiency, material saving, low noise. And our machines work
within high speed which improves its productivity greatly. Besides,
Its products have high quality and fashionable styles. It is widely
used in stores, warehouses, buildings, welcomed by customers
throughout the world. The machines can be designed to produce
different shapes and sizes according to customer's requirements.
Technical parameters:
5 tons hydraulic decoiler | Diameter: 420-560mm hydraulic expansion. Expansion: Hydraulic decoiler
Capacity: 5000kg |
| Leveling device | Roller: 5 rolls leveling
Main power: 5.5kw |
Feeding device
| Servo feeding motor: About 4.4KW |
| Punching press machine | Press machine: 200tons
Punching mould material: Cr12mov |
| Main roll forming machine | Material thickness: 1.0-2.5mm
Raw material: Galvanized steel and black steel sheets
Forming speed: 10-15meters / min Line speed: 4-6m/min
Forming stations: 18 stations
Material of roller: Gcr15, Quench HRC58-62 Plated Chrome
Material of shaft: 45# Steel Shafts diameter: 76mm
Driven system: Chain driven
Main power: 22kw. |
| Hydraulic cutting system | Cutting power: 5.5kw Material of blade: Cr12Mov, Quench HRC58-62 Length measuring: Automatic length measuring Tolerance of length: +-1.5mm |
| Electrical control system | Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requirement)
Length & quantity measurement automatically;
Length & quantity controlled by PLC
Length inaccuracy can be amended easily.
Control panel: Button-type switch and touch screen
The language in the touch screen: English and Chinese |
Working process:
Uncoiling---Leveling---Storage---Feeding---Punching---Cutting---Roll
forming---Hydraulic cutting---Output table
Detailed information:
Main features:
Our standard cable tray roll forming machine uses cantilever type
at the two sides, the punch press do the round ribs in bottom or
different holes’stamping and cutting. The material is guided into
main roll forming machine by guider. By plc control, automatically
improve and adjust different width and height. Cable trays are used
as an alternative to open wiring or electrical conduit systems, and
are commonly used for cable management in commercial and industrial
construction.
Finished products:
After-sale service:
1 . Installation and training of roof forming machine:
a . If buyers visit our factory and check the machine, we will
teach you how to install and use the machine, and also train your
workers/technician face to face.
b . Without visiting, we will send you user manual and video to
teach you to install and operate.
c . If buyer needs our technician to go to your local factory,
please arrange board and lodging and other necessary things.
2 . After Service of roof forming machine:
a . One year guarantee for whole roof forming machine.
b . 24 hours technical support by email or calling
c . If there is any problem found of the roof forming machine, we
will repair it for free in one year.
Main features:
Our standard cable tray roll forming machine produce cable tray
width from 100 to 600mm, and height from 50 to 100mm, uses
cantilever type at the two sides, the punch press do the round ribs
in bottom or different holes’stamping and cutting. The material is
guided into main roll forming machine by guider. By plc control,
automatically improve and adjust different width and height. Cable
trays are used as an alternative to open wiring or electrical
conduit systems, and are commonly used for cable management in
commercial and industrial construction.
